Legal Disclaimer: The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.arubanetworks.com for current and complete HPE Aruba Networking product lines and names.
Getting Started with AOS-S Deployments
Before you get started with your onboarding and provisioning operations, browse through the list of AOS-S switches supported in HPE Aruba Networking Central.
Provisioning Workflow
The following sections list the steps required for provisioning switches in HPE Aruba Networking Central.
Provisioning a Factory Default AOS-S Switch
Like most HPE Aruba Networking devices, AOS-S switches support ZTP Zero Touch Provisioning. ZTP is a device provisioning mechanism that allows automatic and quick provisioning of devices with a minimal or at times no manual intervention.. Switches with factory default configuration have very basic configuration for all ports in VLAN-1. When a new switch (factory default) is powered on, it automatically obtains IP address, connects to HPE Aruba Networking Activate and downloads the provisioning parameters. When the switch identifies HPE Aruba Networking Central as its management entity, it connects to HPE Aruba Networking Central.
To manage switches from HPE Aruba Networking Central, you must onboard the switches to the device inventory and assign a valid subscription.
For step-by-step instructions, see Provisioning Factory Default AOS-S Switches.
Provisioning a Pre-configured or Locally-Managed Switch
Pre-configured switches have customized configuration; for example, an additional VLAN Virtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. or static IP address configured on the default.
Unlike factory default switches, locally managed switches and the switches with custom configuration require one touch provisioning. These switches do not automatically identify HPE Aruba Networking Central as their management platform, therefore you must manually enable the HPE Aruba Networking Central management service on these switches to allow them to connect to HPE Aruba Networking Central.
For step-by-step instructions, see Provisioning Pre-Configured AOS-S Switches.
Group Assignment
HPE Aruba Networking Central supports provisioning switches in one of the following types of groups:
- UI group—Allows you to customize and manage device parameters using the UI workflows, that is, the menu options and tabs available under HPE Aruba Networking Central.
- Template Group—Allows you to configure devices using CLI-based configuration templates.
The following figure illustrates the group assignment workflow in HPE Aruba Networking Central:
Figure 1 Group Assignment-Switches
Configuration and Management
HPE Aruba Networking Central supports managing switch configuration using UI workflows or configuration templates. Based on your configuration requirements, ensure that you assign switches to either UI group or template group.
For more information on managing switches in HPE Aruba Networking Central, see the following topics:
- Configuring AOS-S Switches using Template Groups
- Configuring or Viewing AOS-S Properties in UI Groups
Switch Monitoring
To view the operation status of switches and health of wired access network:
- In the WebUI, use the filter to select a group that has switches.
- Under Manage, click Devices > Switches.
For more information, see Monitoring Your Network.
Monitoring only Mode for AOS-S Switches
HPE Aruba Networking Central allows you to configure AOS-S switches in UI groups only for monitoring purposes. For switches that are configured in this mode, no configuration changes are allowed to be performed in HPE Aruba Networking Central. The recommended software version to configure switches in this mode is 16.10.0010.
For more information, see Monitoring-Only Mode for AOS-S Switches.
Troubleshooting and Diagnostics
The page under HPE Aruba Networking Central > > in the HPE Aruba Networking Central UI displays errors in configuration sync, templates, and a list of configuration overrides. For more information, see Configuring Audit Properties.
To troubleshoot switches remotely, use the tools available under HPE Aruba Networking Central > > . For more information, see Troubleshooting Tools.
