Legal Disclaimer: The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.arubanetworks.com for current and complete HPE Aruba Networking product lines and names.
Changing Time Zone and Configuring NTP Server
This section describes how to change the time zone and how to configure the NTP Network Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. server.
Changing Time Zone
To change the time zone:
-
Go to the
-
Use the up and down arrow keys to navigate to the Change Timezone/NTP option, and press .
-
Use the up and down arrow keys to navigate to the Change Timezone option, and press . A list of regions and their corresponding numbers are displayed. The following list is an example of regions that are displayed:
1 - Africa 2 - America 3 - Antarctica 4 - Arctic 5 - Asia 6 - Atlantic 7 - Australia ... Select region:
-
In the field, use the up and down arrow keys to select the required time zone.
-
Press Esc until you go back to the main menu.
Configuring NTP Server
To configure a Network Time Protocol (NTP) server:
-
Go to the
-
Use the up and down arrow keys to navigate to the Change Timezone/NTP option, and press .
-
Use the up and down arrow keys to navigate to the Configure NTP option, and press .
-
In the field, enter the NTP server hostname and press A message is displayed that the NTP server is configured.
-
Press Esc until you go back to the main menu.
