Legal Disclaimer: The resource assets in this website may include abbreviated and/or legacy terminology for HPE Aruba Networking products. See www.arubanetworks.com for current and complete HPE Aruba Networking product lines and names.
Connections to the Server
Connect the following cables to the correct ports based on the figure below:
- Connect an Ethernet Ethernet is a network protocol for data transmission over LAN. cable to the iLO Integrated Lights-Out (iLO) by Hewlett-Packard Enterprise is a proprietary embedded server management technology providing out-of-band management facilities. port and assign the IP address to the iLO through DHCP Dynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network. or static IP.
- Connect a monitor to the VGA Video Graphics Array (VGA) output allows users to connect their analog computer monitor to other display devices such as televisions and their monitors. port on the server to see the iLO IP Address.
- Connect a key board to the server to setup the server.
- Connect a 10G cable to the SFP The Small Form-factor Pluggable. SFP is a compact, hot-pluggable transceiver that is used for both telecommunication and data communications applications. + port through supported SFP module.
To view all the supported SFP modules, see Supported SFP Modules.
Once the server is powered on and the cables are connected to iLO and SFP+, reboot the server. The monitor displays the iLO IP address that is assigned by the user through DHCP or static IP.
It is recommended to upgrade all the Aruba Central On-Premises nodes to 512 GB for optimum performance. Starting from this release, the 256 GB RAM Random Access Memory. is not supported.
Network Link Aggregation
Through network setup commands menu in Aruba Central On-Premises CLI Command-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. , you can enable network link aggregation in case of any network breakage. For more information, see Network Link Aggregation.