Configuring Application Visibility for Gateways

To view Application Visibility in New HPE Aruba Networking Central, enable Deep Packet Inspection (DPI) on gateways in HPE Aruba Networking Central.

Note:

All Gateways support Application Visibility.

To enable the DPI for Application Visibility, complete the following steps:

  1. To configure a gateway group or gateway, complete either one of these steps:

    • To select a gateway group:

      1. In the HPE Aruba Networking Central application, set the filter to a group that contains at least one branch gateway.

      2. Under Manage, click Devices > Gateways.

      3. Click Config.

    • To select a gateway:

      1. In the HPE Aruba Networking Central application, set the filter to Global or a group that contains at least one branch gateway.

      2. Under Manage, click Devices > Gateways.

      3. Click a gateway under Device Name.

      4. Under Manage, click Device.

  2. If you are in the Basic Mode, click Advanced Mode to access the advanced configuration.

  3. Click Security > Applications.

  4. Click Application Visibility.

  5. Select the Deep Packet Inspection check box.

  6. Select the Application performance monitoring check box.

  7. Click Save Settings.

Figure 1: Configuring Application Visibility for Gateways

What's Next

For more information on Application Visibility, see the following topics: