Security Compliance Format

The Security Compliance report supports the following KPIs:

• Security Compliance Format

• Security Compliance Format

• Total Rogue APs Detected

• Total Wireless Intrusions

The following topic describes the parameters present in the KPIs. These KPIs are only available in the Global scope. These KPIs are only available in pre-defined reports and not in custom reports.

Report Header

The report header contains the following parameters:

Table 1: Report Header Parameter Details

Parameter	Description
Name of the report	Displays the name of the report.
Report Type	Displays the type of the report.
Scope	Displays the context in which the report is generated. For example, at a global-level, site-level, or multiple-site-level.
Report Period	Displays the time span for which the report is generated. Note: Only the start and end dates can be customized on Security reports. By default, data from 12:00AM on the start date to 11:59PM on the end date is displayed.
Generated On	Displays the date and time when the report is completed.

Rogue APs List

The following table describes parameters in the Rogue APs List.

Table 2: ROGUE APs List

Parameter	Description
MAC Address	Displays the MAC address of the rogue AP.
Detecting AP	Displays the MAC address of the AP that detected the rogue AP.
Date/Time detected	Displays the date and time of the detection of the rogue AP.
SSID	Displays the SSID of the rogue AP.
MAC Vendor	Displays the rogue AP vendor.
Channel	Displays the radio channel used by the rogue AP.
Radio	Displays the radio band on which the AP was detected. There are three radio band signals available: 2.4 GHz, 5 GHz, and 6 GHz.
RSSI	Displays the power level of a received radio signal in dBm, generally ranging from 0 (strongest) to -100 (weakest).

WIDS List

The following table describes parameters in the WIDS List.

Table 3: WIDS List

Parameter	Description
Type	Displays the type of intrusion.
Detecting AP	Displays the MAC address of the device that detected the intrusion or attack.
Station MAC	Displays the MAC address of the station under attack or BSSID of the AP under attack.
Date/Time Detected	Displays the date and time of the detected attack.

Total Rogue APs Detected

This report tracks the number of rogue APs detected or active for the selected reporting period, aggregated by the day. The following table describes parameters in the Total Rogue APs Detected trend chart.

Table 4: Total Rogue APs Detected trend chart

Parameter	Description
Rogue AP count	Displays the number of rogue APs detected.
Detected date	Displays the date on which the APs were detected.

Total Wireless Intrusions

This report tracks the total number of wireless intrusions detected or active for the selected reporting period, aggregated by the day. The following table describes parameters in the Total Rogue APs Detected trend chart.

Table 5: Total Wireless Intrusions

Parameter	Description
Intrusion Count	Displays the number of wireless intrusions detected.
Detected date	Displays the date on which the wireless intrusions were detected.