WIDS Format
The WIDS report supports the following KPI:
The report displays 1000 entries in HTML and PDF reports, and 20,000 entries in CSV reports. These KPIs are only available in pre-defined reports and not in custom reports. The following topic describes the parameters present in the ROGUE APs Summary.
Report Header
The report header contains the following parameters:
|
Parameter |
Description |
|---|---|
|
Name of the report |
Displays the name of the report. |
|
Report Type |
Displays the type of the report. |
|
Scope |
Displays the context in which the report is generated. For example, at a global-level, site-level, or multiple-site-level. |
|
Report Period |
Displays the time span for which the report is generated. Note: Only the start and end dates can be customized on Security reports. By default, data from 12:00AM on the start date to 11:59PM on the end date is displayed.
|
|
Generated On |
Displays the date and time when the report is completed. |
Rogue APs Summary
The following table describes parameters in the Rogue APs Summary.
|
Parameter |
Description |
|---|---|
|
Name |
Displays the AP name. |
|
Classification |
Displays whether the AP is a Rogue or a Suspect-Rogue. |
|
Encryption |
The type of encryption used by the device that detected the rogue; for example, WPA or Open. |
|
First Seen |
Displays the date and time the AP was first detected. |
|
Last Seen |
Displays the date and time the AP was last detected. |
|
Last Detecting |
Displays the MAC address of the device that last detected the AP. |
|
SSID |
Displays the SSID of the AP. |
|
Radio |
Displays the radio band on which the AP was detected. There are three radio band signals available: 2.4 GHz, 5 GHz, and 6 GHz. |
|
Total Detecting Devices |
Displays the count of devices that detected the AP. |