Adding a Rule

To add a rule, complete the following steps:

  1. In the Classic Central app, turn on the New Central toggle switch.

    The HPE Aruba Networking Central landing page is displayed.

  2. On the Sites menu, select a site from the list.

  3. Click the configuration icon.

  4. Click Library.

  5. On the Security card, click Network Policies.

    Alternatively, you can complete the following steps:

    1. On the Security card, click Manage.

    2. On the Network Policies card, click Manage.

    The Network Policies list view is displayed.

  6. Hover on the policy to which you want to add a rule, click the ellipsis icon.

  7. Click Add Rule.

    The Create Rule panel is displayed on the right.

  8. Configure the following parameters:

    • Description—Enter a description of the rule.

    • Source—Select a source from the drop-down list. The following options are available:

      • Any

      • Network—Select the Options and enter the IP address.

      • Host—Select the Options and enter the IP address.

    • Destination—Select a destination from the drop-down list. The following options are available:

      • Any

      • Network—Select the Options and enter the IP address.

      • Host—Select the Options and enter the IP address.

    • Service/Application—Select a service or an application from the drop-down list. The following options are available:

      • Any

      • Service

      Note:

      When you select Service from the Service/Application drop-down list, the corresponding Service parameter is displayed. You can also create a new service by clicking the New Service option under Service. For more information, see Creating a Network Service Alias.

    • Action—Select an action from the drop-down list.

  9. Click Create.

    The new rule is added to the specified role-based policy.

The following image displays the parameters to add a rule.

Figure 1: Add Rule