Creating a VRF Profile

To create a VRF profile for a PSM site, complete the following steps:

1. In the Classic Central app, turn on the New Central toggle switch.
   The HPE Aruba Networking Central landing page is displayed.

2. On the Sites menu, select a PSM-specific site from the list.

3. Click the configurationicon.

4. Click Library.

5. On the Routing & Overlays card, click VRF.
   Alternatively, you can complete the following steps:

   1. On the Routing & Overlays card, click Manage.

   2. On the VRF card, click Manage.
      

   The VRF list view is displayed.

6. Click Create Profile.
   The Create Profile side panel is displayed.

7. Enter the VRF profile parameters:

   • Name—Enter the name of the VRF profile.

   • Description—Enter the description for the VRF profile

8. Select the Advanced check-box and configure the following policies and network access lists.

   1. Select an Inbound, Outbound, or Inbound & Outbound from the Policy drop-down list.

   2. Select the corresponding PSM policy from the Inbound, Outbound, or Inbound & Outbound Network Access List drop-down list.

      Note:

      The Advanced option is available only for AOS-CX 10000 Switch Series.

9. Click Create.

10. To delete a profile, hover on the profile name, and click the delete icon.

11. To search for a profile, type the profile name in the search bar. The search bar displays dynamic results as soon as you start typing.

The following image displays the parameters to create a new VRF profile.

Figure 1: Create VRF Profile