How to Deploy Your Wireless Network

This section provides a step-by-step guide to help you deploy and configure your wireless network in HPE Aruba Networking Central. The deployment workflow takes you through the essential stages—from setting up your workspace and onboarding your devices to configuring APs and gateways. Each step includes relevant tasks and links to detailed procedures for a smooth and successful setup.

This section includes the following topics:

Prerequisites

Before you configure your wireless network or onboard your devices, you must complete the following tasks:

  1. Create an HPE GreenLake interface.

  2. Provision the Classic Central service.

    For more information, see the following topics:

Step 1—Installing Devices

To add your wireless devices to your HPE GreenLake workspace, complete the following steps:

  1. Add devices to HPE GreenLake inventory.

  2. Assign the appropriate service and device subscriptions.

    For more information, see the following topics in the HPE GreenLake Edge to Cloud Platform User Guide:

Step 2—Onboarding Devices

To onboard the devices to Classic Central, complete the following steps:

  1. Create a site and device groups.

  2. Pre-provision devices to the correct device group and site before activation.

    For more information, see the following topics:

Step 3—Configuring Devices

To configure your wireless devices and deployment mode, see the following topics: