Manual AP Placement

To start placing APs manually on the floorplan, complete the following steps:

  1. Click the floor number represented in the stack on the Floorplan Manager.

    The floor details is displayed on the side panel.

  2. Click View Floor Plan to display the details of the selected floor.

  3. From the Action drop-down list, select Place Devices.

    The Place Devices page is displayed. Select Manual Placement as placement method and click Next.

    The Place Access Points page is displayed with the list of APs assigned to the selected floor. Real-Time image of the AP is displayed based on the AP model.

  4. Click and drag the APs to the floorplan and place it at the required location.

  5. Click Finish to confirm the AP placement.

Manual AP placement enables you to change the position of the AP manually directly from the floorplan. If the APs are not placed correctly on the floorplan, you can drag and drop the AP at the correct location on the floorplan. Additionally, you can also delete an AP manually. Select the AP on the floorplan that you want to remove, and click Delete.

Note:

When you delete an AP, it is removed from the floorplan , but it still remains assigned to the selected floor.