Rogue Details

You can view the rogue devices on a floorplan if Rogues is enabled in the Show Overlay Objects pane in the Layers Panel. Rogue devices refer to the unauthorized devices in your WLAN.

The location of a rogue is calculated through the Location Engine service. When the service is unable to locate the rogue location on the floorplan, the rogue location falls back to the associated AP location.

Figure 1: Rogue Location

Hover over the rogue icon to display a tool tip. The tool tip shows the SSID of the device and when it was last detected by near by APs.

Click on the rogue icon to view rogue details. A side panel appears with the following information:

• Rogue Name—Name of the device.

• SSID—The SSID broadcast by the rogue device.

• BSSID—The BSSIDs broadcast by the rogue device.

• First Seen—The timestamp at which the rogue device was firstdetected in the network.

• Last Seen—The timestamp at which the rogue device was last detected in the network.

• First Seen By—The device that first detected the rogue device.

• Last Seen By—The device that last detected the rogue device.

• Classification History—The timestamps, classification, and methods of detection used on the rogue device.

Figure 2: Rogue Details