AP Events

The following table lists the AP events supported in HPE Aruba Networking Central.

Event Event Name

101

AP IP Conflict

102

AP Upgrade Start

103

AP Upgrade Failure

104

AP Upgrade Success

105

AP Up

106

AP Insufficient Power Supply

107

AP Modem Plugged

108

AP Modem Unplugged

114

Auth Server Up

115

Auth Server Down

201

Radio Unknown Event

202

Radio Radar Detected

203

Radio Radar Cleared

204

Radio TX Hang

205

Radio TX Hang Cleared

206

Radio 40MHz Intolerance

207

Radio 40MHz Intolerance Cancelled

208

Radio 40MHz Aligned

209

Radio ARM Interference

210

Radio ARM Invalid Channel

211

Radio ARM Error Threshold Exceeded

212

Radio ARM Noise Threshold Exceeded

213

Radio ARM Empty Channel

214

Radio ARM Rogue Containment Triggered

215

Radio ARM Decrease Power

216

Radio ARM Increase Power

217

Radio ARM Radar Turn Off

218

Radio ARM Radar Turn On

219

Radio ARM Channel Quality Threshold

220

Radio ARM Dynamic BW

221

Radio ARM Interference CCA

222

Radio Freeze

223

Radio Unfreeze

224

Radio Down

225

Radio Up

228

Radio Channel Change

401

Mesh Link Up

402

Mesh Link Down

451

VPN IPSec Tunnel Up

452

VPN IPSec Tunnel Down

453

VPN GRE Tunnel Up

454

VPN GRE Tunnel Down

501

AP SSID Scheduled Activation

502

AP SSID Scheduled Deactivation

691

AP Exception

20001 AP Firmware Upgrade
20101 AP Offline
20102 AP Online
20103 AP Reboot
20104 AP Thermal Shutdown enabled
20105 AP Thermal Shutdown disabled
20106 AP Tri-Radio (enabled due to configuration change)
20107 AP Tri-Radio (disabled due to configuration change)
20108 AP Tri-Radio (enabled)
20109 AP Tri-Radio (disabled)

50000

PMKR1 requested by AP

50001

PMKR1 fetch response sent to AP

50002

PMKR1 not present on AP

50003 AP IP Capabilities mismatch in Neighbor Req
50004 AP IP Capabilities mismatch in Cloudfallback Req

To view the list of AP client events, go to AP Client Events.

Client Roaming Sync Failure

When the client tries to roam between APs and the traffic between the APs are blocked, the roaming fails. When a roaming sync failure occurs, the failure is recorded and displayed under the Events tab.