Configure Webhook in JAMF Pro

To configure webhook in JAMF Pro, complete the following steps:

1. Log in to the JAMF Pro dashboard.

2. In the left navigation pane, click Settings and navigate to the Webhooks card.

3. Click New to add a new webhook.

4. In the New Webhook page, configure the following parameters:

   • Display Name—Enter a name for the webhook.

   • Webhook URL—Enter the SCEP Challenge Webhook URL which you have copied from the UEM instance from Central NAC. For more information, see

   • Authentication Type—Select Header Authentication.

   • Header Authentication—Enter the SCEP Challenge Webhook Authentication Header copied from the UEM instance from Central NAC.

     Note:

     The SCEP Challenge Webhook Authentication Header will not be visible in the UEM instance as this is visible only once. Click the Regenerate Token and copy the token and click Save.

   • Connection Timeout—Enter the time in seconds to attempt to connect to the webhook's host server.

   • Read Timeout—Enter the time in seconds to wait for a response from the webhook's host server after sending a request.

   • Content Type—Select JSON.

   • Webhook Event—Select SCEPChallenge which will trigger the webhook.

5. Click Save.

   The webhook is created on JAMF Pro and is listed in the Webhooks page.