Viewing the Notification Rules Dashboard

To view the Notification Rules page, complete the following steps:

  1. On the HPE Aruba Networking Central Network Overview page, click the menu icon.

    The Menu page is displayed.

  2. In the Notification Rules card, click Manage.

    The Notification Rules page is displayed.

    3. Figure 1: Notification Rules Table

    The following table describes the columns in the Notification Rules table.

    Table 1: Notification Rules Column Details

    Column

    Description

    Name

    Displays the name of the notification rule.

    State

    Displays the current status of the notification rule.

    Note:

    If a notification rule is associated with a single destination, the State is displayed as Disabled when the associated destination is deleted. This behavior occurs only when a single destination is configured for the selected notification rule.

    Source

    Displays the notification source from which the information is obtained and the total count of configured subcategories for which notifications are generated.

    Destination

    Displays the type of destination configured to receive notifications and indicates the number of destinations that receive the notification.

Other Table Operation

  • Delete—To delete a notification, hover over the notification table row and click the Delete icon. In the Delete Rule pop-up, confirm the delete operation.

  • Edit—To edit a notification, hover over the notification table row and click the Edit icon. For more information, see Editing Notification Rules.

  • Enable or Disable Rule—To enable or disable a notification rule, hover over the notification table row, click the ellipsis icon and select Enable Rule or Disable Rule. The enable operation is not allowed if the selected rule does not have a destination configured.

  • Bulk Enable or Disable Rule—To enable or disable multiple notification rules, select the checkbox next to the rules, expand the Actions drop-down, and select Enable Rule or Disable Rule. A maximum of 10 rules can be enabled or disabled in a single bulk operation. The bulk enable operation is not allowed if any of the selected rules do not have a destination configured.

Configuring Column Visibility

To configure the visibility of the columns, complete the following steps:

  1. Click the table menu icon.

    The Actions menu is displayed.

  2. Click Customize Columns.

    The Customize Columns pop-up window is displayed.

  3. Complete either or both of the following steps as required:

    • Select the column names to enable or disable the visibility of that column in the table.

    • Click and hold the action icon next to the column you want to move, and drag it to a new position.

    You can click Reset to Defaults to clear your column visibility settings.

  4. Click Apply.

    The adjusted columns are displayed in the table.

Adjusting Column Width

To adjust the width of the columns, complete the following steps:

  1. Hover over the left or right edge of the column that you want to adjust.

    You can identify the edge of the column when the mouse pointer changes to the adjusted shape.

  2. Click and drag the edge to adjust the width of the column.

    You can click Reset Column Sizes in the Actions menu to reset the column widths.