Viewing Application List for Client

The Applications circle in the Client dashboard page displays the list of application that is accessed by the selected client.

To view the client-specific application list, complete the following steps:

1. In the HPE Aruba Networking Central landing page, select a site having at least one active client from the Sites menu.

   Alternatively, you can click the expand icon on the Sites menu to search for a site from the list.

   The site dashboard is displayed with the network and connectivity information for the site.

2. Click Clients.

   The Clients list view is displayed.

3. Select any client from the list.

   The Clients dashboard page is displayed.

4. Click Application.

   The Application table displays the list of application accessed by the client.

5. This is an optionally setting, select the quick filter tabs to filter your applications list:

   • Type:

     • Applications—Displays the list of all applications. Enabled, by default.

     • Websites—Displays the list of all websites.

     Enabling both—Applications and Websites, lists all applications and websites.

   • Application State:

     • Active—Displays the list of applications or websites accessed within the last 15 minutes. Enabled, by default.

     • Inactive—Displays the list of all inactive applications or websites.

     Enabling or disabling both—Active and Inactive, lists all applications and websites.

6. Click the application name to navigate to the Application dashboard page in Client context. For more information, see Viewing Application Dashboard.

7. Click any column except the Name column in an application row to open the side panel.

   The side panel displays information about Application latency.

   Table 1: Application Details

   Column	Description
   Name	Displays the application name.
   Application Health	Represented in a color bar format to gauge the application health.
   Category	Displays the application and website category. To view the list of all supported applications and website categories, see Category List for Applications and Websites Note: The Category column shows both DPI category and WebCC category together.
   Application Type	Displays the application and website type. The following list displays the application types: Public—Indicates that all IP address used by the application is public IPv4/IPv6 address. Example: IP address - 3.2.1.1. Private—Indicates that all IP address used by the application is private IPv4/IPv6 address. Example: IP address - 192.168.1.1. Hybrid—Indicates that the IP address used by the application includes both public and private IP address. Unknown—Indicates that the destination IP is unknown or invalid.
   Reputation	Displays the security risk category for the application. Note: APs and Gateways evaluate the security risks. Switches do not evaluate the security risks. The following list displays the security risk: Trustworthy—The application is considered trustworthy. Not Evaluated—The security risk of the application is unknown.
   Usage	Displays the aggregated data usage for the application. To view the usage data based on Role, Permission, Application Type, or Server Location, you can use the Filters option. The usage data is re-calculated based on the filters applied. For more information on filtering, see Searching and Filtering Applications. Note: The total usage may not add up to the sum of the filtered usage because usage data for Server Locations is available only for public IPs. In some cases, the location may not be available for public IPs.
   Last Used	Displays when this application was last active. Now—The application was active within the last fifteen minutes. Timestamp—Display the timestamp when the application was last active.
   Permission	Displays the connectivity state of the application. Allowed—The client is able to access the application. Blocked—The client is blocked from the application access. Partially Allowed—The client was blocked and later unblocked from the application. Note: This column is applicable for CX switches running 10.13.000 or higher versions.
   TLS Version	Displays the Transport Layer Security (TLS) version. Note: This column is not available for APs and gateways. TLS Version is applicable only on Aruba CX switches running 10.14 or higher versions.
   Certificate Expiry	Displays the date when this application expires. Note: This column is not available for APs and gateways. It is applicable only on HPE Aruba Networking CX switches running 10.14 or higher versions.
   Role	Displays a list of roles of clients accessing the application. The list is sorted alphabetically. The Role is accessible at the Site level as well as the Client level.
   Geo Location	Displays the list of country names based on the destination IP address of the application or website. The country names are sorted alphabetically when the application has multiple countries listed. The Geo Location field is not applicable if Application Type is Private or Multi-cast.

Customizing Columns for Application List

This topic covers the following sections:

• Selecting the Timescope

• Configuring Column Visibility

• Adjusting Column Width

• Filtering Table Data

Configuring Column Visibility

To configure the visibility of the columns, complete the following steps:

1. Click the table menu icon.
   

   The Actions menu is displayed.

2. Click Customize Columns.
   

   The Customize Columns pop-up window is displayed.

3. Complete either or both of the following steps as required:

   • Select the column names to enable or disable the visibility of that column in the table.

   • Click and hold the action icon next to the column you want to move, and drag it to a new position.

   You can click Reset to Defaults to clear your column visibility settings.

4. Click Apply.
   

   The adjusted columns are displayed in the table.

Adjusting Column Width

To adjust the width of the columns, complete the following steps:

1. Hover over the left or right edge of the column you want to adjust.
   

   You can identify the edge of the column when the mouse pointer changes to the adjust shape.

2. Click and drag the edge to adjust the width of the column.
   

   You can click Reset Column Sizes in the Actions menu to reset the column widths.