Resolved Issues

Table 1: Resolved Issues in February 6th 2025 Release
Issue ID	Description
CNX-112001	The Alerts page did not display the action cards for cleared Ops mismatch alerts, including VLAN mismatch, MTU mismatch, link set to half duplex, and link speed mismatch. The fix ensures that action cards are displayed for all the alerts.
CNX-120172	Report runs model window displayed in the Menu > Reports page, did not display slicing information such as day and time periods. The fix ensures that the slicing information is displayed accurately.
CNX-118958	The expanded Hardware card did not display the Temperature parameter details for third-party devices. This issue was seen even though the temperature metrics were available in OpsRamp. The fix ensures that the Temperature is displayed on the Hardware card.
CNX-60442	When creating New VLANs under Configuration > Profiles > VLANs & Networks > Named VLAN profile in HPE Aruba Networking Central, the VLANs were incorrectly created at the Library level instead of the Global, Sites, or Groups level. As a result, the newly created VLANs did not get associated with the intended scope. The fix ensures that the VLANs created under the Named VLAN profile are associated with the correct scope.
CNX-97687	AI-Powered Network Optimization > Association Max Clients Threshold Configuration > 7 Days > Client Association Metrics chart did not display some of the bars for timestamps that contain data. The fix ensures that the Client Association Metrics chart displays correct data.
CNX-111998	The bars in the timeline of an alert did not match with the occurrences. The fix ensures that the alert timeline displays accurate information.
CNX-115790	Assoc or Roaming insight displays incorrect Device Coverage type on the Floor map. The fix ensures that the correct coverage type is displayed.
CNX-116471	HPE Aruba Networking Central incorrectly displayed the Configuration Status value as Synchronized instead of - in the Health card for third-party devices. The fix ensures that the Configuration Status value is displayed as - in the Health card .
CNX-60142	The CPU, memory, and temperature values were not displayed for one polling interval or 5 minutes in the expanded view of the Hardware card of a switch. Thisissue occurred after a VSF switchover. The fix ensures that the CPU, memory, and temperature values are displayed as expected in the expanded view of Hardware card of a switch.
CNX-124230	On the PSM extension page, only VRF-related information was displayed. Network-related information was missing if the PSM extension was installed after creating the VLAN interface. The fix ensures that the PSM extension page displays accurate information.
CNX-124366	APs failed to receive partial configuration settings after creating a new certificate usage profile. The fix ensures that APs successfully receive partial configuration settings.
CNX-118957	HPE Aruba Networking Central displayed inaccurate CPU Utilization and Memory Utilization graphs for third-party switches in the expanded Hardware card. The issue occurred due to a mismatch with the OpsRamp data, as HPE Aruba Networking Central displayed only the latest value of CPU and memory metrics received from OpsRamp without identifying the specific instance. The fix ensures that the Hardware card displays accurate CPU Utilization and Memory Utilization graphs for third-party switches.
CNX-120381	HPE Aruba Networking Central failed to support site movement for third-party switches that are discovered through OpsRamp. The fix ensures that the site movement for the third-party switches happen seamlessly.
CNX-115200	The Device Inventory card fails to display the third-party device count in HPE Aruba Networking Central. The fix ensures that the card displays the third-party device count.
CNX-121505	The tooltip customization for the Alerts, Devices, and Clients bar in the Sites and Alerts expanded cards was previously displayed incorrectly in the HPE Aruba Networking Central WebUI. This fix ensures that the tooltip customization is now displayed correctly.
CNX-124782	The delete button was missing when a policy was created under Global > Security > Network Policies in HPE Aruba Networking Central. The fix ensures that the delete button is available after creating a policy.
CNX-116159	In HPE Aruba Networking Central, the Properties card incorrectly displayed the Part Number for the Third-Party Device (TPD) switches as the Model number. The fix ensures that the Part number is now displayed correctly.
CNX-118868	Users were unable to delete device policies because of internal Access Control Lists (ACL) that are still attached to the device interface. This fix ensures that the device policies and ACL attachments to the interface are deleted successfully.
CNX-161943	The tooltip in the Performance Uplink Throughput chart occasionally fails to display the expected metric values under specific conditions. When datasets include only one timestamp or when a second data point contains null values, the tooltip either shows only the timestamp or omits the metric values, even when valid data exists.

CNX-112001

The Alerts page did not display the action cards for cleared Ops mismatch alerts, including VLAN mismatch, MTU mismatch, link set to half duplex, and link speed mismatch. The fix ensures that action cards are displayed for all the alerts.

CNX-120172

Report runs model window displayed in the Menu > Reports page, did not display slicing information such as day and time periods. The fix ensures that the slicing information is displayed accurately.

CNX-118958

The expanded Hardware card did not display the Temperature parameter details for third-party devices. This issue was seen even though the temperature metrics were available in OpsRamp. The fix ensures that the Temperature is displayed on the Hardware card.

CNX-60442

When creating New VLANs under Configuration > Profiles > VLANs & Networks > Named VLAN profile in HPE Aruba Networking Central, the VLANs were incorrectly created at the Library level instead of the Global, Sites, or Groups level. As a result, the newly created VLANs did not get associated with the intended scope. The fix ensures that the VLANs created under the Named VLAN profile are associated with the correct scope.

CNX-97687

AI-Powered Network Optimization > Association Max Clients Threshold Configuration > 7 Days > Client Association Metrics chart did not display some of the bars for timestamps that contain data. The fix ensures that the Client Association Metrics chart displays correct data.

CNX-111998

The bars in the timeline of an alert did not match with the occurrences. The fix ensures that the alert timeline displays accurate information.

CNX-115790

Assoc or Roaming insight displays incorrect Device Coverage type on the Floor map. The fix ensures that the correct coverage type is displayed.

CNX-116471

HPE Aruba Networking Central incorrectly displayed the Configuration Status value as Synchronized instead of - in the Health card for third-party devices. The fix ensures that the Configuration Status value is displayed as - in the Health card .

CNX-60142

The CPU, memory, and temperature values were not displayed for one polling interval or 5 minutes in the expanded view of the Hardware card of a switch. Thisissue occurred after a VSF switchover. The fix ensures that the CPU, memory, and temperature values are displayed as expected in the expanded view of Hardware card of a switch.

CNX-124230

On the PSM extension page, only VRF-related information was displayed. Network-related information was missing if the PSM extension was installed after creating the VLAN interface. The fix ensures that the PSM extension page displays accurate information.

CNX-124366

APs failed to receive partial configuration settings after creating a new certificate usage profile. The fix ensures that APs successfully receive partial configuration settings.

CNX-118957

HPE Aruba Networking Central displayed inaccurate CPU Utilization and Memory Utilization graphs for third-party switches in the expanded Hardware card. The issue occurred due to a mismatch with the OpsRamp data, as HPE Aruba Networking Central displayed only the latest value of CPU and memory metrics received from OpsRamp without identifying the specific instance. The fix ensures that the Hardware card displays accurate CPU Utilization and Memory Utilization graphs for third-party switches.

CNX-120381

HPE Aruba Networking Central failed to support site movement for third-party switches that are discovered through OpsRamp. The fix ensures that the site movement for the third-party switches happen seamlessly.

CNX-115200

The Device Inventory card fails to display the third-party device count in HPE Aruba Networking Central. The fix ensures that the card displays the third-party device count.

CNX-121505

The tooltip customization for the Alerts, Devices, and Clients bar in the Sites and Alerts expanded cards was previously displayed incorrectly in the HPE Aruba Networking Central WebUI. This fix ensures that the tooltip customization is now displayed correctly.

CNX-124782

The delete button was missing when a policy was created under Global > Security > Network Policies in HPE Aruba Networking Central. The fix ensures that the delete button is available after creating a policy.

CNX-116159

In HPE Aruba Networking Central, the Properties card incorrectly displayed the Part Number for the Third-Party Device (TPD) switches as the Model number. The fix ensures that the Part number is now displayed correctly.

CNX-118868

Users were unable to delete device policies because of internal Access Control Lists (ACL) that are still attached to the device interface. This fix ensures that the device policies and ACL attachments to the interface are deleted successfully.

CNX-161943

The tooltip in the Performance Uplink Throughput chart occasionally fails to display the expected metric values under specific conditions. When datasets include only one timestamp or when a second data point contains null values, the tooltip either shows only the timestamp or omits the metric values, even when valid data exists.