Resolved Issues

Table 1: Resolved Issues in April 9th 2025 Release
Issue ID	Description
CNX-107243	The VLAN Mismatch between AP and Switch alert did not display the correct details and count of clients connected to or disconnected from the network. The fix ensures that the VLAN Mismatch between AP and Switch alert displays accurate data.
CNX-115699	HPE Aruba Networking Central failed to display the MTU value for third-party switches in the expanded Wired Interfaces card. The fix ensures that the MTU value is displayed correctly.
CNX-120380	The Identifier parameter in the expanded VLAN card displayed an incorrect VLAN ID for third-party switches in HPE Aruba Networking Central. The fix ensures that the Identifier parameter displays the correct VLAN ID.
CNX-120419	A mismatch was observed between the slot diagram and port numbers for third-party switches on the Wired Interfaces card in HPE Aruba Networking Central. The fix ensures that the slot diagram and the port numbers are displayed correctly.
CNX-120895	The VLANs in the third-party switch faceplate were not associated with the respective interfaces on the expanded Wired Interfaces card in HPE Aruba Networking Central. The fix ensures that the VLANs are associated with the respective interfaces.
CNX-128696	HPE Aruba Networking Central did not allow users to reconfigure Port Mode from Trunk to Access through an API call. The fix ensures that users can reconfigure Port Mode from Trunk to Access through an API call.
CNX-132151	The Wired Interfaces card did not show any information for third-party switches. The fix ensures that the interfaces data is visible.
CNX-30977 CNX-24674	The number place of a policy did not change when re-ordered. This issue was seen on the Library > Roles & Policies tab because unused entries were not cleared in DB or cache. The fix ensures that the number changes correctly when a policy is re-ordered.
CNX-130467	While creation of a System Administration profile for APs, if RADIUS or TACACS was selected as Authentication Type, the profile creation failed. The fix ensures that the profile creation for APs works as expected.
CNX-135135	The configuration push failed when users tried to configure http-server access-mode at all scopes. This issue occurred due to a default profile created in the UI during onboarding. The fix ensures that the configuration push works as expected.
CNX-136191	The LAN Tunnels card on the Network summary dashboard for a gateway cluster did not display offline tunnels. The fix ensures that the LAN Tunnels card displays both online and offline tunnels.
CNX-142286	The Create button was unavailable for a System Information profile when the hostname was set using an alias. The fix ensures that the Create button is available when the hostname is set using an alias.
CNX-118530 CNX-133946	HPE Aruba Networking Central added a new IP address instead of updating the existing relay IP helper address. The new addresses will be appended to the existing ones using a post or patch.
CNX-141605	The device count for third-party devices was displayed incorrectly in the Device Inventory card. The fix ensures that the correct device count is displayed.
CNX-142009	Resetting the hostname of the system information profile to its default value using the API successfully changed the setting on the device. However, this update did not reflect in theHPE Aruba Networking Central UI under Configuration > System > System Information profile. Additionally, the Description and SNMP V3 Engine ID parameters were reset to empty values in the HPE Aruba Networking Central UI. The fix ensures that resetting the hostname to its default value works through API as well as in the HPE Aruba Networking Central UI.
CNX-144043	The NOC and Sites cards displayed incorrect device count and health status in the HPE Aruba Networking Central dashboard. The fix ensures that the device count and health status are now correctly displayed across the HPE Aruba Networking Central dashboard.

CNX-107243

The VLAN Mismatch between AP and Switch alert did not display the correct details and count of clients connected to or disconnected from the network. The fix ensures that the VLAN Mismatch between AP and Switch alert displays accurate data.

CNX-115699

HPE Aruba Networking Central failed to display the MTU value for third-party switches in the expanded Wired Interfaces card. The fix ensures that the MTU value is displayed correctly.

CNX-120380

The Identifier parameter in the expanded VLAN card displayed an incorrect VLAN ID for third-party switches in HPE Aruba Networking Central. The fix ensures that the Identifier parameter displays the correct VLAN ID.

CNX-120419

A mismatch was observed between the slot diagram and port numbers for third-party switches on the Wired Interfaces card in HPE Aruba Networking Central. The fix ensures that the slot diagram and the port numbers are displayed correctly.

CNX-120895

The VLANs in the third-party switch faceplate were not associated with the respective interfaces on the expanded Wired Interfaces card in HPE Aruba Networking Central. The fix ensures that the VLANs are associated with the respective interfaces.

CNX-128696

HPE Aruba Networking Central did not allow users to reconfigure Port Mode from Trunk to Access through an API call. The fix ensures that users can reconfigure Port Mode from Trunk to Access through an API call.

CNX-132151

The Wired Interfaces card did not show any information for third-party switches. The fix ensures that the interfaces data is visible.

CNX-30977

CNX-24674

The number place of a policy did not change when re-ordered. This issue was seen on the Library > Roles & Policies tab because unused entries were not cleared in DB or cache. The fix ensures that the number changes correctly when a policy is re-ordered.

CNX-130467

While creation of a System Administration profile for APs, if RADIUS or TACACS was selected as Authentication Type, the profile creation failed. The fix ensures that the profile creation for APs works as expected.

CNX-135135

The configuration push failed when users tried to configure http-server access-mode at all scopes. This issue occurred due to a default profile created in the UI during onboarding. The fix ensures that the configuration push works as expected.

CNX-136191

The LAN Tunnels card on the Network summary dashboard for a gateway cluster did not display offline tunnels. The fix ensures that the LAN Tunnels card displays both online and offline tunnels.

CNX-142286

The Create button was unavailable for a System Information profile when the hostname was set using an alias. The fix ensures that the Create button is available when the hostname is set using an alias.

CNX-118530

CNX-133946

HPE Aruba Networking Central added a new IP address instead of updating the existing relay IP helper address. The new addresses will be appended to the existing ones using a post or patch.

CNX-141605

The device count for third-party devices was displayed incorrectly in the Device Inventory card. The fix ensures that the correct device count is displayed.

CNX-142009

Resetting the hostname of the system information profile to its default value using the API successfully changed the setting on the device. However, this update did not reflect in theHPE Aruba Networking Central UI under Configuration > System > System Information profile. Additionally, the Description and SNMP V3 Engine ID parameters were reset to empty values in the HPE Aruba Networking Central UI. The fix ensures that resetting the hostname to its default value works through API as well as in the HPE Aruba Networking Central UI.

CNX-144043

The NOC and Sites cards displayed incorrect device count and health status in the HPE Aruba Networking Central dashboard. The fix ensures that the device count and health status are now correctly displayed across the HPE Aruba Networking Central dashboard.