BGP ASN Global Pool
Configuration > Networking > Routing > BGP ASN Global Pool
Use this dialog box to configure the ASN Range to assign Autonomous System Numbers (ASNs) for new appliances. Note the following before configuration:
-
ASNs are applied only to new appliances. The ASNs configured in this dialog box do not impact or change any previous or manually configured ASNs.
-
ASN Range is configured for Default Segment and cannot be changed.
-
ASN Orchestration assigns the same ASN to EdgeHA appliances.
-
ASN Orchestration assigns the same ASN to appliances with same site name.
-
If you use Orchestrator ASNs, do not use ASN 65534 and 1. These numbers are reserved.
Enter the start and end ranges for the ASNs. Click the +Add Reserved ASN to exclude any ASNs from being applied to an appliance. You can reassign ASNs manually by using the BGP tab.