Management Routes Tab

Configuration > Networking > Routing > Management Routes

Use this tab to configure next-hops for management interfaces.

• Management routes specify the default gateways and local IP subnets for the management interfaces.

• In a Dual-Homed Router Mode configuration, you might need to add a static management route for flow redirection between appliances paired for redundancy at the same site.

• The management routes table shows the configured static routes and any dynamically created routes. If you use DHCP, the appliance automatically creates appropriate dynamic routes. A user cannot delete or add dynamic routes.

• If the Source IP is listed as 0.0.0.0, packets sent using this route use the Interface’s IP address as the Source IP address. If the Source IP lists a specific IP address, that IP address is used instead.

---